www.finnedtubes.cn | Site map | Contact | Download Catalogue | Print | Favorite | 中文magvant.cn
IK-CHINA LIMITED
 
Home
Boiler tubes

Heat exchanger tubes

Welded pipes

L, LL, KLM finned tubes (fin tubes)

high frequency welded (serrated) finned tubes (fin tubes)

(serrated) extruded finned tubes

hot dipped galvanized oval (elliptical) finned tubes, rectangular fin tubes

condenser fin flat tubes

H / double H finned tubes (fin tubes)

Studded Pipes

Laser welded finned tubes (fin tubes)

G embedded finned tubes (fin tubes)

inner finned tubes (fin tubes)

longitudinal finned tubes (fin tubes)

seamless finned tubes with two longitudinal opposite fins

casting alloy tubes

Tube finning machine

Aluminum plates, strips,foils

Aluminum welding wire rod

Aluminum tubes, profile

Economizer for Boiler

air-cooled heat exchanger (air cooler)

material

standard & specification

 
ASME SA 178 welded carbon steel tubes

SA-178/SA-178M ASME BPVC.II/a-2015

Specification for electric-resistance-welded carbon steel and carbon-manganese steel boiler and super heater tubes

This specification covers minimum-wall-thickness electric-resistance-welded tubes made of carbon steel and cabon-manganese steel intended for use as boiler tubes, boiler flues, super heater flues, and safe ends.

Ordering Information:
1.Orders for material under this specification should include the following, as required, to describe the desired material adequately: Quantity, name of material( electric-resistance-welded tubes). Grade (A, C, or D). Size, Length, Optional requirements (product analysis, crush test, hydrostatic or nondestructive electric test.) Test report required ( Certification section of specification A450/A450M), specification, and designation, individual supplementary requirements, if required and special requirements.

ASME SA178 Grade A: C 0.06-0.18 Mn 0.27-0.63 P 0.035 max. S 0.035 max.
ASME SA178 Grade C: C 0.35max. Mn 0.8 max. P 0.035 max. S 0.035 max.
ASME SA178 Grade D: C 0.27max. Mn 1.00-1.50P 0.035 max. S 0.015 max. Si. 0.10 min.

ASME SA178 Grade C: Tensile strength 415 Mpa. min. Yield strength. min. 255Mpa. Elongation in 2 in or 50mm min. 30%
ASME SA178 Grade D: Tensile strength 485 Mpa. min. Yield strength. min. 275Mpa. Elongation in 2 in or 50mm min. 30%

 
Search >>

Contact Us >>

Phone: 
Fax: +86-510-68930106
E-mail: info@magvant.com

Technical communication
tech@magvant.com

www.magvant.com

Terms & conditions
Privacy statement