www.magvant.com www.finnedtubes.cn | 中文 | Site map | Contact | Mail Login | Print | Favorite
magvant

IK-CHINA LIMITED

无锡世佳节能换热设备有限公司

news
Home
 

workflow

Inquiry

Technical Confirming

Custom Design

Production

Inspection

Delivery

Feedback

 
 
 
 
Some sugguestion about problems during Galvanizing processing

Some advise for galvanizing processing during production of Hot dipped hot dipped galvanized oval (elliptical) fin tubes ,rectangular fins tubes :


Sometimes, during galvanizing processing of fin tubes, it may happens that galvanizing layer is not even. Some place no zinc covered, while another places too much zinc spots. It is not a big question. From Magvant's production experience, we give below suggestion for your reference:

At first, put oval fin tubes into alkaline solution more than 1 hr. Before lifting, worker in charge should make sure no oil outside of fin tubes.

Secondly, after dipped in alkaline solution, put in air for 2 or 3 hrs.

Thirdly, put in acid solution 2 or 3 hrs, a little longer will be better.

Following above advise, you can check if the galvanizing problem is solved in next production. Welcome for Technical communicationwith Magvant.

 
Search >>

Contact Us >>
Phone: 
Fax: +86-510-68930106
E-mail: info@magvant.com

Technical communication
tech@magvant.com
Terms & conditions
Privacy statement